OBDHut

OBDHut

P0762

Moderate

Shift Solenoid B Electrical/ 2-3 Shift Solenoid Circuit Electrical

What Does P0762 Mean?

The Shift Solenoid B electrical circuit or the 2-3 shift solenoid circuit has an electrical fault. The TCM has detected an abnormal voltage condition such as an open circuit, short to ground, or short to battery in the solenoid B wiring. This prevents the TCM from properly controlling the solenoid, affecting gear shift transitions.

Common Causes

35%

Open or short circuit in the shift solenoid B wiring harness

transmission wiring harness
internal harness
wire terminals

30%

Shift solenoid B internal coil failure

shift solenoid B

20%

Corroded or damaged transmission connector pins

transmission connector
connector pins
connector seals

10%

TCM solenoid driver circuit failure for solenoid B

transmission control module

5%

Ground circuit issue for the solenoid pack

ground wire
ground terminal

Diagnostic Steps

1

Measure shift solenoid B resistance at the transmission connector — open or near-zero resistance indicates coil failure.

2

Check for voltage supply and TCM drive signal at the solenoid B pins with the key on.

3

Inspect the external transmission harness connector for corroded, bent, or damaged pins.

4

Perform continuity and short-to-ground tests on the solenoid B circuit wiring from TCM to transmission.

5

If wiring checks pass and solenoid resistance is out of specification, replace solenoid B.

Estimated Repair Cost

$150 - $900

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P0762 mean?

The Shift Solenoid B electrical circuit or the 2-3 shift solenoid circuit has an electrical fault. The TCM has detected an abnormal voltage condition such as an open circuit, short to ground, or short to battery in the solenoid B wiring. This prevents the TCM from properly controlling the solenoid, ...

What causes P0762?

The most common cause of P0762 (Shift Solenoid B Electrical/ 2-3 Shift Solenoid Circuit Electrical) is: Open or short circuit in the shift solenoid B wiring harness

How much does it cost to fix P0762?

Typical repair costs for P0762 range from $150 to $900, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P0762?

The transmission will likely enter limp mode with limited gear availability. Driving at low speed to a repair facility is safe, but normal driving should be avoided until repaired.

How do I diagnose P0762?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P0762 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Automatic Transmission

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.