OBDHut

OBDHut

P0767

Moderate

Shift Solenoid C Electrical

What Does P0767 Mean?

The electrical circuit for Shift Solenoid C has a fault. The TCM has detected an abnormal voltage condition in the solenoid C wiring, such as an open circuit, short to ground, or short to battery voltage. This purely electrical fault prevents the TCM from properly controlling solenoid C, directly impacting gear selection.

Common Causes

35%

Open or short circuit in the shift solenoid C wiring harness

transmission wiring harness
internal harness
wire terminals

30%

Shift solenoid C internal coil failure (open or shorted)

shift solenoid C

20%

Corroded or damaged transmission connector disrupting solenoid C circuit

transmission connector
connector pins
connector seals

10%

TCM internal solenoid driver circuit failure

transmission control module

5%

Solenoid pack ground circuit fault

ground wire
ground terminal

Diagnostic Steps

1

Measure solenoid C resistance at the transmission connector — an open or near-zero reading confirms a coil failure.

2

Check for voltage supply and TCM drive signal at the solenoid C pins with the key on.

3

Inspect the external transmission harness connector for corroded, bent, or pushed-back pins.

4

Perform continuity and short-to-ground tests on the solenoid C circuit from TCM to transmission.

5

If wiring is intact and solenoid resistance is out of spec, replace shift solenoid C.

Estimated Repair Cost

$150 - $900

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P0767 mean?

The electrical circuit for Shift Solenoid C has a fault. The TCM has detected an abnormal voltage condition in the solenoid C wiring, such as an open circuit, short to ground, or short to battery voltage. This purely electrical fault prevents the TCM from properly controlling solenoid C, directly im...

What causes P0767?

The most common cause of P0767 (Shift Solenoid C Electrical) is: Open or short circuit in the shift solenoid C wiring harness

How much does it cost to fix P0767?

Typical repair costs for P0767 range from $150 to $900, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P0767?

Expect limp mode with limited gear selection. Driving at reduced speed to a repair facility is generally safe, but normal driving should be avoided.

How do I diagnose P0767?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P0767 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Automatic Transmission

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.