What Does P080A Mean?
The Clutch Position has not been learned by the control module. Many modern vehicles require a clutch position sensor learn/calibration procedure so the PCM knows the full range of clutch pedal travel (fully engaged to fully disengaged). This code indicates the learning procedure has not been completed, possibly after a module replacement, battery disconnect, or sensor replacement.
Common Causes
40%
Clutch position learn procedure not performed after component replacement
25%
Battery disconnect or PCM reset cleared learned values
20%
Clutch position sensor replaced without recalibration
10%
Clutch position sensor fault preventing learn procedure from completing
5%
Software update needed for the PCM/TCM
Diagnostic Steps
1
Initiate the clutch position sensor learn procedure using the scan tool's bidirectional control or special functions menu for the transmission module.
2
Follow the manufacturer-specific learn procedure: typically involves fully depressing and releasing the clutch pedal several times with engine running.
3
Verify the CPS is reading correctly before attempting the learn — check for P0805-P0809 codes that would indicate a sensor issue preventing calibration.
4
Clear all codes after the learn procedure completes and test drive to verify no codes return.
5
If the learn procedure fails repeatedly, check for TSBs regarding PCM software updates that may be required for the learn procedure to succeed.
Estimated Repair Cost
$0 - $150
Parts + labor, varies by vehicle and location
The Clutch Position has not been learned by the control module. Many modern vehicles require a clutch position sensor learn/calibration procedure so the PCM knows the full range of clutch pedal travel (fully engaged to fully disengaged). This code indicates the learning procedure has not been comple...
The most common cause of P080A (Clutch Position Not Learned) is: Clutch position learn procedure not performed after component replacement
Typical repair costs for P080A range from $0 to $150, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Safe to drive. The vehicle will operate normally, but some features dependent on accurate clutch position data (skip shift, smooth idle transitions) may not function optimally until the learn procedure is completed.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P080A to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Clutch / Transmission Control System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
