What Does P0825 Mean?
The gear lever push-pull switch, also known as the shift anticipate switch, has a circuit malfunction. This switch signals the TCM that the driver is about to make a shift, allowing the transmission to pre-stage hydraulic pressure for faster, smoother gear changes. A fault here results in slower or harsher shifting.
Common Causes
35%
Defective gear lever push-pull switch (shift anticipate switch)
25%
Wiring fault between the push-pull switch and TCM
20%
Corroded or loose connector at the shift lever assembly
10%
Mechanical misalignment of switch relative to gear lever actuation
10%
TCM input circuit failure for push-pull switch signal
Diagnostic Steps
1
Monitor the push-pull switch status in live data while operating the gear lever — the switch should toggle when the driver grasps and begins to move the lever.
2
Check for voltage or continuity at the push-pull switch connector when the switch is actuated and released.
3
Inspect the switch connector and wiring for damage, corrosion, or loose pins.
4
Verify proper mechanical alignment of the switch — ensure it activates consistently when the lever is gripped or moved.
5
Replace the push-pull switch if electrical tests confirm it is not switching properly.
Estimated Repair Cost
$100 - $400
Parts + labor, varies by vehicle and location
The gear lever push-pull switch, also known as the shift anticipate switch, has a circuit malfunction. This switch signals the TCM that the driver is about to make a shift, allowing the transmission to pre-stage hydraulic pressure for faster, smoother gear changes. A fault here results in slower or ...
The most common cause of P0825 (Gear Lever Push - Pull Switch (Shift Anticipate)) is: Defective gear lever push-pull switch (shift anticipate switch)
Typical repair costs for P0825 range from $100 to $400, depending on the vehicle, location, and whether you do it yourself or go to a shop.
The primary consequence is slightly harsher or delayed shifts since the TCM cannot anticipate gear changes. This does not affect vehicle safety. Driving is safe; repair at your convenience.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P0825 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Transmission Control System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
