What Does P082E Mean?
The gear lever Y position circuit is reading low voltage. The TCM has detected that the Y-axis position sensor output is below the acceptable minimum threshold. This typically results from a short to ground in the signal wire, a failed sensor, or a loss of reference voltage supply to the sensor.
Common Causes
30%
Gear lever Y position sensor failure with low output
30%
Short to ground in the Y position sensor signal wire
20%
Corroded connector reducing signal voltage
10%
Loss of 5V reference supply to the position sensor
10%
TCM internal input circuit fault pulling signal low
Diagnostic Steps
1
Measure voltage at the gear lever Y position sensor signal pin and compare to the minimum threshold specified by the manufacturer.
2
Verify that the 5V reference voltage is present and stable at the sensor connector.
3
Disconnect the sensor and check voltage at the TCM input pin to isolate the fault between sensor and wiring.
4
Inspect the signal wire for shorts to ground, especially near connectors, grommets, and routing clamps.
5
Replace the gear lever position sensor if reference voltage and wiring test normal.
Estimated Repair Cost
$150 - $500
Parts + labor, varies by vehicle and location
The gear lever Y position circuit is reading low voltage. The TCM has detected that the Y-axis position sensor output is below the acceptable minimum threshold. This typically results from a short to ground in the signal wire, a failed sensor, or a loss of reference voltage supply to the sensor.
The most common cause of P082E (Gear Lever Y Position Circuit Low) is: Gear lever Y position sensor failure with low output
Typical repair costs for P082E range from $150 to $500, depending on the vehicle, location, and whether you do it yourself or go to a shop.
The TCM may incorrectly read the gear lever position, causing shift errors or limp mode. Drive carefully and avoid aggressive driving until the issue is repaired.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P082E to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Transmission Control System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
