OBDHut

OBDHut

P0848

Professional

Transmission Fluid Pressure Sensor/Switch "B" Circuit High

What Does P0848 Mean?

The TCM has detected that the voltage from the transmission fluid pressure sensor/switch "B" circuit is above the maximum allowable threshold. This high voltage indicates an open sensor, disconnected connector, broken signal wire, or a short to battery voltage. The TCM cannot obtain valid pressure feedback from the B circuit.

Common Causes

35%

Open or failed transmission fluid pressure sensor B

Transmission fluid pressure sensor B

25%

Disconnected sensor B connector

Electrical connector
Transmission internal harness

20%

Open circuit in signal wire

Wiring harness
Signal wire

15%

Short to battery voltage in the signal wire

Wiring harness

5%

TCM connector or internal input failure

TCM connector
TCM

Diagnostic Steps

1

Confirm the pressure sensor B PID reads at or near maximum voltage (approximately 5V), verifying the high circuit condition.

2

Verify the sensor B connector is fully seated — check whether it was left disconnected after recent transmission work.

3

Measure the sensor resistance; an open/infinite reading confirms sensor failure.

4

With the sensor disconnected, check the signal wire for a short to battery voltage.

5

Test continuity of the signal, ground, and reference wires from the sensor to the TCM connector.

Estimated Repair Cost

$200 - $800

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P0848 mean?

The TCM has detected that the voltage from the transmission fluid pressure sensor/switch "B" circuit is above the maximum allowable threshold. This high voltage indicates an open sensor, disconnected connector, broken signal wire, or a short to battery voltage. The TCM cannot obtain valid pressure f...

What causes P0848?

The most common cause of P0848 (Transmission Fluid Pressure Sensor/Switch "B" Circuit High) is: Open or failed transmission fluid pressure sensor B

How much does it cost to fix P0848?

Typical repair costs for P0848 range from $200 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P0848?

Shift quality will be compromised and the transmission may enter limp mode. The vehicle can be driven at reduced capability for short distances. Prompt repair is recommended.

How do I diagnose P0848?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P0848 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Automatic Transmission

Difficulty

Professional

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.