OBDHut

OBDHut

P0875

Moderate

Transmission Fluid Pressure Sensor/Switch "D" Circuit

What Does P0875 Mean?

The TCM has detected a general malfunction in the transmission fluid pressure sensor/switch 'D' circuit. This sensor monitors hydraulic pressure in a fourth transmission circuit, typically associated with a specific clutch application or torque converter circuit. The TCM is receiving a signal that is outside normal operating parameters.

Common Causes

35%

Faulty transmission fluid pressure sensor/switch 'D'

transmission fluid pressure sensor D
sensor O-ring

25%

Damaged or corroded wiring to sensor 'D'

sensor wiring harness
transmission connector

20%

Poor electrical connection at sensor or TCM connector

sensor connector
TCM connector pins

12%

Internal transmission hydraulic issue in circuit 'D'

valve body
clutch pack
check ball

8%

TCM internal circuit failure

transmission control module

Diagnostic Steps

1

Retrieve freeze frame data and note the gear, RPM, temperature, and other conditions when the code set.

2

Verify 5V reference voltage and ground at the pressure sensor 'D' connector.

3

Monitor live data PID for pressure sensor 'D' to see if the signal is absent, stuck, or erratic.

4

Inspect the sensor connector and transmission case pass-through connector for corrosion, contamination, or damaged pins.

5

Test sensor 'D' resistance/output against manufacturer specifications; replace if out of range.

Estimated Repair Cost

$100 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P0875 mean?

The TCM has detected a general malfunction in the transmission fluid pressure sensor/switch 'D' circuit. This sensor monitors hydraulic pressure in a fourth transmission circuit, typically associated with a specific clutch application or torque converter circuit. The TCM is receiving a signal that i...

What causes P0875?

The most common cause of P0875 (Transmission Fluid Pressure Sensor/Switch "D" Circuit) is: Faulty transmission fluid pressure sensor/switch 'D'

How much does it cost to fix P0875?

Typical repair costs for P0875 range from $100 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P0875?

Drive cautiously. The TCM may use default pressure values which can result in firm shifts. Avoid heavy loads and extended driving until the sensor circuit is repaired.

How do I diagnose P0875?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P0875 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Transmission Hydraulic Pressure Monitoring

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.