What Does P0B1F Mean?
DTC P0B1F indicates the hybrid battery pack voltage sense "D" circuit is operating outside its expected performance range. The BMS has detected that the "D" section voltage readings, while present, do not match expected values given the current state of charge, temperature, and load. This range/performance fault typically suggests gradual cell degradation or sensor drift rather than a hard failure.
Common Causes
30%
Degraded hybrid battery cells in the "D" pack section
25%
Voltage sense tap or sensor losing calibration accuracy over time
20%
High-resistance connection in the sense circuit causing voltage offset
15%
Temperature-related cell performance exceeding BMS tolerance thresholds
10%
BMS calibration data corruption or software fault
Diagnostic Steps
1
Compare the "D" section voltage to all other pack sections under identical SOC and load conditions using scan tool live data.
2
Perform a hybrid battery capacity or balance test focusing on the "D" section cell modules.
3
Measure the actual "D" section voltage at the terminals with proper PPE and compare to the BMS reported value.
4
Check the sense circuit resistance end-to-end to identify any high-resistance connections.
5
Review temperature sensor data for the "D" section to rule out thermal factors causing the performance deviation.
Estimated Repair Cost
$300 - $4,500
Parts + labor, varies by vehicle and location
DTC P0B1F indicates the hybrid battery pack voltage sense "D" circuit is operating outside its expected performance range. The BMS has detected that the "D" section voltage readings, while present, do not match expected values given the current state of charge, temperature, and load. This range/perf...
The most common cause of P0B1F (Hybrid Battery Pack Voltage Sense "D" Circuit Range/Performance) is: Degraded hybrid battery cells in the "D" pack section
Typical repair costs for P0B1F range from $300 to $4,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Range/performance deviations often indicate early-stage cell degradation. While not immediately hazardous, continued operation without addressing the root cause can accelerate pack imbalance and lead to more serious faults.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P0B1F to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Hybrid/EV Battery System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
