What Does P0B64 Mean?
P0B64 indicates that the hybrid battery voltage sense circuit for cell group "I" is reporting values outside the expected range or exhibiting poor performance characteristics. The BMS is receiving voltage readings from group I that deviate from normal behavior compared to other cell groups. This range/performance fault often represents an early warning of developing cell imbalance or increasing circuit resistance that has not yet reached a hard fault threshold.
Common Causes
30%
Cell group I degradation causing voltage to drift outside normal range relative to other groups
25%
High resistance in the voltage sense wiring or connector for cell group I
20%
Cell balancing failure allowing group I to diverge from other cell groups
15%
Temperature-related voltage variation due to cooling system imbalance affecting group I
10%
BMS calibration drift or software error in group I voltage thresholds
Diagnostic Steps
1
Use BMS diagnostic data to compare cell group I voltage against all other cell groups at rest and under load.
2
Check the hybrid battery cooling system for blockages or uneven airflow near cell group I.
3
Measure actual cell group I voltage at the module terminals and compare with the BMS-reported value.
4
Inspect the voltage sense wiring for increased resistance due to corrosion or physical damage.
5
Perform a battery capacity test to evaluate cell group I health relative to the rest of the pack.
6
Check for any pending BMS software updates or calibration resets from the manufacturer.
Estimated Repair Cost
$200 - $4,000
Parts + labor, varies by vehicle and location
P0B64 indicates that the hybrid battery voltage sense circuit for cell group "I" is reporting values outside the expected range or exhibiting poor performance characteristics. The BMS is receiving voltage readings from group I that deviate from normal behavior compared to other cell groups. This ran...
The most common cause of P0B64 (Hybrid Battery Voltage Sense "I" Circuit Range/Performance) is: Cell group I degradation causing voltage to drift outside normal range relative to other groups
Typical repair costs for P0B64 range from $200 to $4,000, depending on the vehicle, location, and whether you do it yourself or go to a shop.
A cell group operating outside its expected performance envelope may indicate progressive degradation. The vehicle may experience reduced electric range and power availability. Continued driving is generally safe short-term, but the condition should be monitored to prevent escalation.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P0B64 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Hybrid Battery / High-Voltage System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
