What Does P0B92 Mean?
The battery management system has detected that the voltage reading from hybrid battery sense circuit "R" is below the minimum expected threshold. This indicates a potential deep discharge condition, a shorted cell, or a wiring fault pulling the voltage sense line low.
Safety Warning
A genuinely low cell voltage can lead to cell reversal and thermal runaway. Do not drive until diagnosed. Tow to a qualified hybrid service facility if a cell is confirmed failed.
Common Causes
40%
Shorted or deeply discharged battery cell within module "R"
25%
Voltage sense wire shorted to ground
20%
Corroded or high-resistance connection causing voltage drop in the sense circuit
15%
Battery management controller input fault reading low
Diagnostic Steps
1
Step 1: Read the voltage value for cell group "R" via the scan tool to confirm it is below the minimum threshold.
2
Step 2: With the HV system de-energized, directly measure module "R" voltage at its terminals with a DVOM to verify the actual cell voltage.
3
Step 3: If the direct measurement is normal, check the sense wire for shorts to ground.
4
Step 4: If cell voltage is genuinely low, perform a cell balance test and monitor for excessive self-discharge over 24 hours.
5
Step 5: Inspect the battery module for physical damage, leakage, or swelling.
Estimated Repair Cost
$300 - $5,000
Parts + labor, varies by vehicle and location
The battery management system has detected that the voltage reading from hybrid battery sense circuit "R" is below the minimum expected threshold. This indicates a potential deep discharge condition, a shorted cell, or a wiring fault pulling the voltage sense line low.
The most common cause of P0B92 (Hybrid Battery Voltage Sense "R" Circuit Low) is: Shorted or deeply discharged battery cell within module "R"
Typical repair costs for P0B92 range from $300 to $5,000, depending on the vehicle, location, and whether you do it yourself or go to a shop.
A genuinely low cell voltage can lead to cell reversal and thermal runaway. Do not drive until diagnosed. Tow to a qualified hybrid service facility if a cell is confirmed failed.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P0B92 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Hybrid Battery Pack / High-Voltage System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
