OBDHut

OBDHut

P1630

Critical
Moderate

Accelerator Pedal Position Sensor 1 Signal Too Low

What Does P1630 Mean?

The accelerator pedal position sensor circuit 1 is reporting a voltage signal that is below the expected minimum threshold. This prevents the PCM from accurately determining driver throttle input demand.

Safety Warning

Vehicle may enter reduced power mode or fail to respond to throttle input, creating dangerous merging and acceleration situations. Do not drive until repaired.

Common Causes

40%

Faulty accelerator pedal position sensor assembly

Accelerator pedal position sensor
APP sensor
Pedal assembly

30%

Wiring short to ground or open circuit in APP sensor 1 signal wire

Sensor wiring
Signal wire
Harness
Connectors

20%

Corroded or damaged connector at pedal sensor

Pedal connector
Pins
Terminals

10%

Low voltage supply to APP sensor from PCM

PCM
Power supply circuit
Fuse

Diagnostic Steps

1

Step 1: Monitor APP sensor 1 voltage with scan tool while slowly depressing accelerator pedal

2

Step 2: Check reference voltage supply to APP sensor (typically 5V) at sensor connector

3

Step 3: Inspect accelerator pedal sensor connector for corrosion, water, or damaged pins

4

Step 4: Test sensor signal wire continuity and resistance from pedal to PCM

5

Step 5: Measure APP sensor 1 voltage directly at sensor terminals to isolate wiring vs sensor fault

Estimated Repair Cost

$150 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P1630 mean?

The accelerator pedal position sensor circuit 1 is reporting a voltage signal that is below the expected minimum threshold. This prevents the PCM from accurately determining driver throttle input demand.

What causes P1630?

The most common cause of P1630 (Accelerator Pedal Position Sensor 1 Signal Too Low) is: Faulty accelerator pedal position sensor assembly

How much does it cost to fix P1630?

Typical repair costs for P1630 range from $150 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P1630?

Vehicle may enter reduced power mode or fail to respond to throttle input, creating dangerous merging and acceleration situations. Do not drive until repaired.

How do I diagnose P1630?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P1630 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Throttle Control System

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.