OBDHut

OBDHut

P2114

Moderate

Throttle/Pedal Position Sensor "C" Minimum Stop Performance

What Does P2114 Mean?

The PCM has detected that throttle or pedal position sensor C is not achieving the expected minimum stop position signal. This redundant sensor failure compromises the system's ability to verify accurate throttle position.

Common Causes

35%

Failed throttle position sensor C circuit within throttle body assembly

Throttle Body Assembly
TPS Sensor

30%

Accelerator pedal position sensor C circuit fault or sensor degradation

Accelerator Pedal Position Sensor
Pedal Assembly

20%

Damaged wiring, corroded connectors, or poor ground connection in sensor C circuit

Wiring Harness
Connectors
Ground Wires

10%

PCM reference voltage issue affecting sensor C power supply

PCM
Power Distribution

5%

Contamination or mechanical issue preventing proper sensor reading

Throttle Body
Pedal Sensor

Diagnostic Steps

1

Step 1: Monitor sensor C voltage/position data at closed throttle with scan tool and compare to specifications

2

Step 2: Verify proper reference voltage (typically 5V) at sensor C connector with DVOM

3

Step 3: Check sensor C ground circuit continuity and resistance to battery negative

4

Step 4: Perform voltage sweep test by slowly depressing accelerator pedal while monitoring all sensor circuits for correlation

5

Step 5: Replace throttle body or pedal position sensor assembly if sensor C shows incorrect minimum voltage with proper reference/ground

Estimated Repair Cost

$100 - $700

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2114 mean?

The PCM has detected that throttle or pedal position sensor C is not achieving the expected minimum stop position signal. This redundant sensor failure compromises the system's ability to verify accurate throttle position.

What causes P2114?

The most common cause of P2114 (Throttle/Pedal Position Sensor "C" Minimum Stop Performance) is: Failed throttle position sensor C circuit within throttle body assembly

How much does it cost to fix P2114?

Typical repair costs for P2114 range from $100 to $700, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2114?

PCM may limit engine power due to loss of redundant sensor verification. Inconsistent throttle response poses risk of unexpected acceleration or deceleration.

How do I diagnose P2114?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2114 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Electronic Throttle Control System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.