OBDHut

OBDHut

P212D

Critical
Moderate

Throttle Position Sensor/Switch "G" Circuit High

What Does P212D Mean?

The PCM has detected an abnormally high voltage signal from Throttle Position Sensor G circuit. This indicates a circuit open condition or voltage signal exceeding normal operating range.

Safety Warning

Vehicle will likely enter limp mode with severely restricted throttle operation. May cause sudden power loss in traffic creating dangerous conditions.

Common Causes

35%

Throttle body position sensor internal failure or open circuit within sensor

Throttle Body Assembly
TPS Sensor

30%

Open circuit in TPS signal wire or poor connection at connector

Wiring Harness
Electrical Connectors

20%

Corroded or damaged connector terminals causing high resistance

Connector Pins
Connector Housing

10%

Loss of sensor ground causing reference voltage pull-up

Ground Circuit
Ground Connection

5%

Failed PCM with internal pull-up circuit malfunction

Powertrain Control Module

Diagnostic Steps

1

Step 1: Inspect throttle body connector for corrosion, pushed-out pins, or loose connection; wiggle test while monitoring live data

2

Step 2: Backprobe TPS G signal wire and verify voltage (should show 5V with connector disconnected if circuit is open)

3

Step 3: Check sensor ground circuit continuity and verify less than 0.5 ohms resistance to battery negative

4

Step 4: Test 5V reference voltage supply to throttle body (should be stable 4.8-5.2V with key on, engine off)

5

Step 5: If wiring and power/ground are good, replace throttle body assembly

Estimated Repair Cost

$150 - $800

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P212D mean?

The PCM has detected an abnormally high voltage signal from Throttle Position Sensor G circuit. This indicates a circuit open condition or voltage signal exceeding normal operating range.

What causes P212D?

The most common cause of P212D (Throttle Position Sensor/Switch "G" Circuit High) is: Throttle body position sensor internal failure or open circuit within sensor

How much does it cost to fix P212D?

Typical repair costs for P212D range from $150 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P212D?

Vehicle will likely enter limp mode with severely restricted throttle operation. May cause sudden power loss in traffic creating dangerous conditions.

How do I diagnose P212D?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P212D to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Electronic Throttle Control (ETC)

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.