OBDHut

OBDHut

P2131

Moderate

Throttle/Pedal Position Sensor/Switch "F" Circuit Range/Performance

What Does P2131 Mean?

The PCM has determined that Throttle/Pedal Position Sensor F signal is not correlating properly with other position sensors or is out of expected range for operating conditions. This is a rationality or performance fault.

Common Causes

35%

Accelerator pedal position sensor drift or degradation causing correlation mismatch

Accelerator Pedal Assembly
APP Sensor

25%

Contamination or mechanical binding in accelerator pedal assembly

Pedal Assembly
Pedal Bushings

20%

Intermittent connection or high resistance in sensor circuit affecting signal quality

Wiring Harness
Electrical Connectors

12%

Throttle body sensor out of calibration causing correlation fault

Throttle Body Assembly

8%

PCM software requiring update or calibration issue

PCM Software Update

Diagnostic Steps

1

Step 1: Monitor both APP sensor voltages simultaneously in live data and verify they track proportionally through pedal range

2

Step 2: Physically inspect accelerator pedal for binding, sticking, or contamination (floor mat interference, debris)

3

Step 3: Graph APP sensor voltages if scanner capable and look for erratic movement, flat spots, or sudden jumps

4

Step 4: Check for Technical Service Bulletins related to APP sensor calibration or software updates

5

Step 5: If correlation between sensors is incorrect or erratic, replace accelerator pedal assembly

Estimated Repair Cost

$200 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2131 mean?

The PCM has determined that Throttle/Pedal Position Sensor F signal is not correlating properly with other position sensors or is out of expected range for operating conditions. This is a rationality or performance fault.

What causes P2131?

The most common cause of P2131 (Throttle/Pedal Position Sensor/Switch "F" Circuit Range/Performance) is: Accelerator pedal position sensor drift or degradation causing correlation mismatch

How much does it cost to fix P2131?

Typical repair costs for P2131 range from $200 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2131?

May cause reduced throttle response or limp mode activation. Could result in unexpected acceleration characteristics affecting vehicle control.

How do I diagnose P2131?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2131 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Electronic Throttle Control (ETC)

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.