OBDHut

OBDHut

P2147

Critical
Moderate

Fuel Injector Group "A" Supply Voltage Circuit Low

What Does P2147 Mean?

The PCM has detected abnormally low voltage in the fuel injector group A supply circuit. This indicates a short to ground or excessive current draw affecting multiple injectors.

Safety Warning

May cause severe misfires, loss of power, and potential engine damage. Short circuit could drain battery or cause electrical fire. Do not drive.

Common Causes

40%

Short to ground in injector power supply wiring harness

Wiring harness

25%

Failed fuel injector with internal short causing excessive current draw

Fuel injector

20%

Chafed or damaged wiring rubbing against engine or chassis ground

Wiring harness
Wire loom

10%

Failed injector driver module with internal short

Injector driver module

5%

Water intrusion in injector connector causing short circuit

Injector connector
Connector seal

Diagnostic Steps

1

Step 1: Disconnect all injectors in group A and measure resistance from power supply to ground; should be infinite

2

Step 2: Reconnect injectors one at a time while monitoring circuit resistance to isolate shorted injector

3

Step 3: Inspect injector harness for damage, particularly near heat sources or moving components

4

Step 4: Check injector driver module for signs of overheating or component failure

5

Step 5: Measure individual injector resistance and compare to specifications (typically 12-16 ohms)

Estimated Repair Cost

$150 - $1,200

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2147 mean?

The PCM has detected abnormally low voltage in the fuel injector group A supply circuit. This indicates a short to ground or excessive current draw affecting multiple injectors.

What causes P2147?

The most common cause of P2147 (Fuel Injector Group "A" Supply Voltage Circuit Low) is: Short to ground in injector power supply wiring harness

How much does it cost to fix P2147?

Typical repair costs for P2147 range from $150 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2147?

May cause severe misfires, loss of power, and potential engine damage. Short circuit could drain battery or cause electrical fire. Do not drive.

How do I diagnose P2147?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2147 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Fuel Injection System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.