OBDHut

OBDHut

P2241

Moderate

O2 Sensor Positive Current Control Circuit Low Bank 2 Sensor 1

What Does P2241 Mean?

The PCM detected abnormally low current in the positive control circuit for Bank 2 Sensor 1 oxygen sensor heater. This indicates insufficient current flow through the heater element, preventing proper sensor operation.

Common Causes

35%

High resistance in O2 sensor heater circuit wiring or connections

Wiring harness
Connector terminals

30%

Partially failed oxygen sensor with degraded heater element

Bank 2 Sensor 1 O2 sensor

20%

Poor ground connection for O2 sensor heater circuit

Ground wire
Ground terminal

10%

Weak voltage supply from O2 heater relay or fuse

O2 heater relay
O2 heater fuse

5%

PCM driver circuit providing insufficient current

Powertrain Control Module

Diagnostic Steps

1

Step 1: Check all connections at Bank 2 Sensor 1 O2 sensor for corrosion and proper seating

2

Step 2: Measure voltage drop across positive and ground circuits while heater is active (should be minimal)

3

Step 3: Test O2 sensor heater element resistance (should be within manufacturer specification, typically 3-10 ohms)

4

Step 4: Check ground circuit continuity and resistance to chassis ground (should be less than 1 ohm)

5

Step 5: Monitor actual heater current with amp clamp and compare to specifications

Estimated Repair Cost

$150 - $450

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2241 mean?

The PCM detected abnormally low current in the positive control circuit for Bank 2 Sensor 1 oxygen sensor heater. This indicates insufficient current flow through the heater element, preventing proper sensor operation.

What causes P2241?

The most common cause of P2241 (O2 Sensor Positive Current Control Circuit Low Bank 2 Sensor 1) is: High resistance in O2 sensor heater circuit wiring or connections

How much does it cost to fix P2241?

Typical repair costs for P2241 range from $150 to $450, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2241?

Safe to drive temporarily but may cause extended warm-up time, poor fuel economy, and increased emissions. Prolonged operation can damage catalytic converter.

How do I diagnose P2241?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2241 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Emissions Control

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.