OBDHut

OBDHut

P2244

Moderate

O2 Sensor Reference Voltage Performance Bank 1 Sensor 1

What Does P2244 Mean?

The PCM detected abnormal performance in the reference voltage circuit for Bank 1 Sensor 1 oxygen sensor. The reference voltage is present but not within expected parameters for proper sensor operation.

Common Causes

35%

Intermittent connection or high resistance in O2 sensor wiring or connectors

Wiring harness
Connector terminals

30%

Degraded oxygen sensor with weak or erratic signal output

Bank 1 Sensor 1 O2 sensor

20%

Poor ground connection affecting reference voltage stability

Ground wire
Sensor ground

10%

Electromagnetic interference affecting signal circuit

Wiring harness
Shielding

5%

PCM reference voltage circuit degradation or instability

Powertrain Control Module

Diagnostic Steps

1

Step 1: Check all connections at Bank 1 Sensor 1 for looseness, corrosion, or intermittent contact

2

Step 2: Monitor reference voltage with scan tool or multimeter while wiggling harness to identify intermittent issues

3

Step 3: Measure resistance of signal wire from sensor to PCM (should be very low, less than 5 ohms)

4

Step 4: Check for proper ground circuit integrity and voltage drop (should be minimal)

5

Step 5: Monitor O2 sensor voltage response during snap throttle test; replace sensor if response is sluggish

Estimated Repair Cost

$150 - $450

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2244 mean?

The PCM detected abnormal performance in the reference voltage circuit for Bank 1 Sensor 1 oxygen sensor. The reference voltage is present but not within expected parameters for proper sensor operation.

What causes P2244?

The most common cause of P2244 (O2 Sensor Reference Voltage Performance Bank 1 Sensor 1) is: Intermittent connection or high resistance in O2 sensor wiring or connectors

How much does it cost to fix P2244?

Typical repair costs for P2244 range from $150 to $450, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2244?

Vehicle is safe to drive but may experience intermittent poor fuel economy, hesitation, and increased emissions. PCM may switch to open-loop operation periodically.

How do I diagnose P2244?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2244 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Fuel System / Emissions Control

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.