OBDHut

OBDHut

P2341

Moderate

Cylinder 6 Above Knock Threshold

What Does P2341 Mean?

Cylinder 6 Above Knock Threshold indicates the knock sensor system detected persistent detonation on cylinder 6 that exceeds the ECM's maximum timing retard capability. The combustion events in this cylinder are abnormally violent despite the ECM applying maximum knock mitigation.

Common Causes

30%

Carbon buildup in cylinder 6 increasing effective compression ratio

Intake Valves
Combustion Chamber Cleaner

25%

Restricted fuel injector on cylinder 6 causing lean condition

Fuel Injector (Cylinder 6)
Injector O-Ring

25%

Knock sensor malfunction or degraded wiring

Knock Sensor
Knock Sensor Harness

20%

Poor fuel quality or incorrect octane rating

Fuel
Fuel Filter

Diagnostic Steps

1

Step 1: Review per-cylinder knock retard data. Isolated high retard on cylinder 6 confirms a localized issue.

2

Step 2: Test fuel injector 6 flow and spray pattern. Use an injector balance test or swap with an adjacent injector to verify.

3

Step 3: Perform compression test on cylinder 6 and compare to specifications and other cylinders.

4

Step 4: Inspect knock sensor resistance and signal integrity. Check for proper mounting torque and clean contact surface.

5

Step 5: If compression is elevated from carbon, perform a decarbonization service appropriate for the engine.

Estimated Repair Cost

$100 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2341 mean?

Cylinder 6 Above Knock Threshold indicates the knock sensor system detected persistent detonation on cylinder 6 that exceeds the ECM's maximum timing retard capability. The combustion events in this cylinder are abnormally violent despite the ECM applying maximum knock mitigation.

What causes P2341?

The most common cause of P2341 (Cylinder 6 Above Knock Threshold) is: Carbon buildup in cylinder 6 increasing effective compression ratio

How much does it cost to fix P2341?

Typical repair costs for P2341 range from $100 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2341?

Ongoing knock events risk piston damage and rod bearing failure. Reduce engine load and have the condition diagnosed and corrected promptly.

How do I diagnose P2341?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2341 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Ignition/Combustion System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.