What Does P2617 Mean?
The PCM has detected an open circuit or communication failure in the crankshaft position sensor output circuit. This output signal is typically sent to other control modules for synchronization purposes.
Safety Warning
Vehicle may not start, stall unexpectedly, or experience severe drivability issues. May leave driver stranded.
Common Causes
40%
Open circuit or broken wire in crankshaft position sensor output harness
25%
Faulty PCM output driver circuit for crankshaft position signal
20%
Corroded or damaged connector terminals at PCM or receiving module
15%
Failed receiving module not accepting crankshaft position signal
Diagnostic Steps
1
Step 1: Visually inspect all connectors and wiring in the crankshaft position output circuit for breaks, loose connections, or corrosion
2
Step 2: Check for continuity in the output circuit wiring from PCM to receiving module with harness disconnected
3
Step 3: Verify proper ground circuits at both PCM and receiving modules
4
Step 4: Monitor crankshaft position output signal with oscilloscope while cranking engine
5
Step 5: Test PCM output driver circuit function per manufacturer specifications
Estimated Repair Cost
$150 - $1,500
Parts + labor, varies by vehicle and location
The PCM has detected an open circuit or communication failure in the crankshaft position sensor output circuit. This output signal is typically sent to other control modules for synchronization purposes.
The most common cause of P2617 (Crankshaft Position Signal Output Circuit/Open) is: Open circuit or broken wire in crankshaft position sensor output harness
Typical repair costs for P2617 range from $150 to $1,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Vehicle may not start, stall unexpectedly, or experience severe drivability issues. May leave driver stranded.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2617 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Engine Management/Ignition System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
