OBDHut

OBDHut

P2620

Critical
Moderate

Throttle Position Output Circuit/Open

What Does P2620 Mean?

The PCM has detected an open circuit or complete lack of signal from the throttle position output circuit. This code specifically relates to the output signal from the throttle control system, not the sensor input.

Safety Warning

Vehicle may enter limp mode with severely reduced power or fail to accelerate. Do not drive at highway speeds or in heavy traffic.

Common Causes

40%

Broken or disconnected wiring in throttle position output circuit

Wiring harness
Electrical connectors

25%

Failed throttle body or throttle actuator control motor

Electronic throttle body
Throttle actuator

20%

Corroded or damaged connector pins at throttle body or PCM

Throttle body connector
PCM connector

15%

Faulty PCM with failed output driver circuit

PCM

Diagnostic Steps

1

Step 1: Visually inspect throttle body connector for corrosion, bent pins, or damage

2

Step 2: Check wiring continuity from PCM to throttle body on all control circuits using wiring diagram

3

Step 3: Measure resistance of throttle motor windings (typically 1-10 ohms depending on vehicle)

4

Step 4: Monitor throttle position and commanded position with scan tool during key on/engine off test

5

Step 5: Perform PCM output test if available through bi-directional controls

Estimated Repair Cost

$200 - $1,200

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2620 mean?

The PCM has detected an open circuit or complete lack of signal from the throttle position output circuit. This code specifically relates to the output signal from the throttle control system, not the sensor input.

What causes P2620?

The most common cause of P2620 (Throttle Position Output Circuit/Open) is: Broken or disconnected wiring in throttle position output circuit

How much does it cost to fix P2620?

Typical repair costs for P2620 range from $200 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2620?

Vehicle may enter limp mode with severely reduced power or fail to accelerate. Do not drive at highway speeds or in heavy traffic.

How do I diagnose P2620?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2620 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Electronic Throttle Control

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.