OBDHut

OBDHut

P2625

Critical
Moderate

Injector Control Pressure Regulator Circuit High

What Does P2625 Mean?

The PCM has detected abnormally high voltage or current in the injector control pressure regulator circuit. This indicates a short to power or an open ground in the fuel pressure control system.

Safety Warning

Uncontrolled fuel pressure may cause engine damage, excessive smoke, or sudden power loss. Have vehicle towed to prevent catastrophic fuel system failure.

Common Causes

30%

Wiring shorted to battery voltage in pressure regulator circuit

Wiring harness
Electrical connectors

25%

Open or poor ground connection for injector pressure regulator

Ground wire
Ground connection
Engine ground strap

25%

Failed injector control pressure regulator with internal open circuit

Injector control pressure regulator
ICP valve

20%

PCM internal fault with failed driver circuit

PCM
Engine control module

Diagnostic Steps

1

Step 1: Check and clean all ground connections for fuel injection system and PCM

2

Step 2: Disconnect pressure regulator and check for unwanted voltage on control circuit (should be 0V key off)

3

Step 3: Inspect wiring harness for damage or shorts to power, especially near high-current circuits

4

Step 4: Measure ground circuit continuity and resistance (should be <0.5 ohms to battery negative)

5

Step 5: Test PCM output signal with oscilloscope to verify proper voltage range and PWM frequency

Estimated Repair Cost

$250 - $1,500

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2625 mean?

The PCM has detected abnormally high voltage or current in the injector control pressure regulator circuit. This indicates a short to power or an open ground in the fuel pressure control system.

What causes P2625?

The most common cause of P2625 (Injector Control Pressure Regulator Circuit High) is: Wiring shorted to battery voltage in pressure regulator circuit

How much does it cost to fix P2625?

Typical repair costs for P2625 range from $250 to $1,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2625?

Uncontrolled fuel pressure may cause engine damage, excessive smoke, or sudden power loss. Have vehicle towed to prevent catastrophic fuel system failure.

How do I diagnose P2625?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2625 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Diesel Fuel Injection System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.