OBDHut

OBDHut

P2654

Moderate

B Rocker Arm Actuator Control Circuit High Bank 1

What Does P2654 Mean?

The ECM has detected abnormally high voltage in the 'B' rocker arm actuator control circuit on Bank 1. This typically indicates a short to voltage, open ground circuit, or high resistance in the control circuit preventing proper actuator operation.

Common Causes

35%

Open or high resistance ground circuit for rocker arm actuator

Ground wire
Ground connection

30%

Control circuit wire shorted to battery voltage

Engine wiring harness

20%

Failed rocker arm actuator solenoid with open internal circuit

Rocker arm actuator solenoid

15%

Corroded or damaged connector causing high resistance

Wiring connector
Connector terminals

Diagnostic Steps

1

Step 1: Verify ground circuit integrity at actuator connector and engine ground points using multimeter

2

Step 2: Disconnect actuator and check for voltage on control wire; should be 0V with key on until ECM commands activation

3

Step 3: Check for short to voltage by measuring resistance between control wire and battery positive (should be infinite)

4

Step 4: Measure actuator solenoid resistance (typically 6-12 ohms); infinite reading indicates open coil

5

Step 5: Repair ground circuit, replace actuator, or repair wiring based on test results

Estimated Repair Cost

$150 - $650

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2654 mean?

The ECM has detected abnormally high voltage in the 'B' rocker arm actuator control circuit on Bank 1. This typically indicates a short to voltage, open ground circuit, or high resistance in the control circuit preventing proper actuator operation.

What causes P2654?

The most common cause of P2654 (B Rocker Arm Actuator Control Circuit High Bank 1) is: Open or high resistance ground circuit for rocker arm actuator

How much does it cost to fix P2654?

Typical repair costs for P2654 range from $150 to $650, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2654?

Safe to drive with reduced engine performance and fuel economy. Repair soon to restore proper engine operation and prevent long-term efficiency losses.

How do I diagnose P2654?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2654 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing/Lift System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.