OBDHut

OBDHut

P2663

Moderate

B Rocker Arm Actuator Control Circuit Low Bank 2

What Does P2663 Mean?

The PCM has detected abnormally low voltage in the Bank 2 'B' rocker arm actuator control circuit. This indicates a short to ground in the wiring or a problem with the actuator solenoid coil.

Common Causes

35%

Wiring harness short to ground or damaged insulation

Engine Wiring Harness
Actuator Control Wire

30%

Failed rocker arm actuator solenoid with internal short to ground

Rocker Arm Actuator Solenoid
VVT Solenoid

20%

Damaged or corroded connector causing short circuit

Actuator Connector
Connector Terminals

10%

Water intrusion or oil contamination in connector creating ground path

Electrical Connector
Connector Seal

5%

PCM internal driver circuit shorted to ground

PCM
ECM

Diagnostic Steps

1

Step 1: Disconnect the rocker arm actuator connector and check for oil or coolant contamination that could cause a short

2

Step 2: Measure resistance from actuator control wire to ground at the harness side with actuator disconnected; should read infinite resistance

3

Step 3: Measure resistance across actuator solenoid terminals (typical 5-30 ohms); also check resistance from each terminal to solenoid housing (should be infinite)

4

Step 4: Inspect wiring harness routing for chafing points where wire insulation may be damaged, particularly near sharp edges or hot components

5

Step 5: If wiring and actuator test good, suspect PCM driver circuit failure; verify by checking for short on PCM side with all actuators disconnected

Estimated Repair Cost

$150 - $650

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2663 mean?

The PCM has detected abnormally low voltage in the Bank 2 'B' rocker arm actuator control circuit. This indicates a short to ground in the wiring or a problem with the actuator solenoid coil.

What causes P2663?

The most common cause of P2663 (B Rocker Arm Actuator Control Circuit Low Bank 2) is: Wiring harness short to ground or damaged insulation

How much does it cost to fix P2663?

Typical repair costs for P2663 range from $150 to $650, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2663?

Vehicle is safe to drive but will experience reduced performance and fuel economy. The PCM will disable the affected actuator to prevent damage to control circuits.

How do I diagnose P2663?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2663 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing / Cylinder Deactivation System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.