OBDHut

OBDHut

P2717

Moderate

Pressure Control Solenoid "D" Intermittent

What Does P2717 Mean?

The TCM has detected an intermittent electrical signal from pressure control solenoid D. This suggests a loose connection, intermittent short, or solenoid that is failing sporadically.

Common Causes

40%

Loose or corroded connector at pressure control solenoid D

Solenoid Connector
Connector Pins

30%

Intermittent wiring harness fault due to rubbing, heat damage, or flexing

Transmission Wiring Harness

20%

Pressure control solenoid D with intermittent internal failure

Pressure Control Solenoid D

8%

Contaminated transmission fluid causing intermittent solenoid sticking

Transmission Fluid
Transmission Filter

2%

Intermittent TCM internal fault or poor ground connection

Transmission Control Module
Ground Connection

Diagnostic Steps

1

Step 1: Thoroughly inspect and wiggle test all wiring and connectors to solenoid D while monitoring scan tool data

2

Step 2: Check for proper pin tension in solenoid connector; look for pushed-back pins or corrosion

3

Step 3: Inspect wiring harness routing for contact with hot or moving components

4

Step 4: Monitor live data during test drive to capture intermittent fault occurrence

5

Step 5: Check all ground connections in transmission circuit for tightness and corrosion

Estimated Repair Cost

$150 - $750

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2717 mean?

The TCM has detected an intermittent electrical signal from pressure control solenoid D. This suggests a loose connection, intermittent short, or solenoid that is failing sporadically.

What causes P2717?

The most common cause of P2717 (Pressure Control Solenoid "D" Intermittent) is: Loose or corroded connector at pressure control solenoid D

How much does it cost to fix P2717?

Typical repair costs for P2717 range from $150 to $750, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2717?

May cause unpredictable shifting behavior or intermittent limp mode. Generally safe to drive short distances but should be repaired promptly to prevent transmission damage.

How do I diagnose P2717?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2717 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Automatic Transmission

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.