OBDHut

OBDHut

P2739

Moderate

Pressure Control Solenoid "F" Control Circuit High

What Does P2739 Mean?

The TCM has detected abnormally high voltage in the Pressure Control Solenoid F control circuit. This typically indicates a short to voltage, open circuit, or solenoid driver failure in the TCM.

Common Causes

35%

Open circuit in wiring harness between TCM and pressure control solenoid F

Transmission Wiring Harness
Connector Terminals

30%

Internally open pressure control solenoid F coil preventing current flow

Pressure Control Solenoid F

15%

Short to voltage (battery positive) in solenoid control circuit wiring

Wiring Harness
Damaged Wire Insulation

15%

Loose, corroded, or pushed-out connector pins causing intermittent open circuit

Solenoid Connector
Connector Pins
Connector Lock

5%

Failed TCM with damaged driver circuit unable to pull control circuit low

Transmission Control Module

Diagnostic Steps

1

Step 1: Inspect all connectors in solenoid F circuit for looseness, bent pins, or corrosion

2

Step 2: Disconnect solenoid F and measure coil resistance; infinite resistance indicates open coil

3

Step 3: With solenoid disconnected, check for battery voltage on control wire indicating short to power

4

Step 4: Perform continuity test from TCM connector to solenoid connector to identify open circuit in harness

5

Step 5: If wiring is intact and solenoid tests open, replace solenoid; if solenoid is good, test TCM driver output capability

Estimated Repair Cost

$150 - $1,200

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2739 mean?

The TCM has detected abnormally high voltage in the Pressure Control Solenoid F control circuit. This typically indicates a short to voltage, open circuit, or solenoid driver failure in the TCM.

What causes P2739?

The most common cause of P2739 (Pressure Control Solenoid "F" Control Circuit High) is: Open circuit in wiring harness between TCM and pressure control solenoid F

How much does it cost to fix P2739?

Typical repair costs for P2739 range from $150 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2739?

May cause transmission to default to limp mode with reduced functionality. Vehicle may experience harsh shifts, limited gear selection, or unexpected transmission behavior affecting safe operation.

How do I diagnose P2739?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2739 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Automatic Transmission Electrical Control System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.