OBDHut

OBDHut

P2769

Moderate

Torque Converter Clutch Circuit Low

What Does P2769 Mean?

The TCM has detected lower than expected voltage or current in the torque converter clutch circuit. This indicates insufficient electrical signal to properly engage the torque converter lockup clutch.

Common Causes

35%

Faulty torque converter clutch solenoid with high internal resistance

TCC Solenoid
Lockup Solenoid

30%

High resistance in wiring or poor ground connection

Wiring Harness
Ground Connection
Connector

20%

Low transmission fluid level or pressure affecting solenoid operation

Transmission Fluid
Transmission Filter

15%

TCM internal driver circuit weakness or failure

Transmission Control Module

Diagnostic Steps

1

Step 1: Check transmission fluid level and condition; low fluid directly affects solenoid pressure

2

Step 2: Measure TCC solenoid resistance and compare to specifications (typically 10-30 ohms)

3

Step 3: Verify ground circuit integrity by measuring voltage drop during solenoid operation (should be less than 0.2V)

4

Step 4: Check system voltage during operation; low battery voltage can cause this code

5

Step 5: Monitor actual vs commanded TCC duty cycle with scan tool to identify control vs mechanical issues

Estimated Repair Cost

$200 - $1,000

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2769 mean?

The TCM has detected lower than expected voltage or current in the torque converter clutch circuit. This indicates insufficient electrical signal to properly engage the torque converter lockup clutch.

What causes P2769?

The most common cause of P2769 (Torque Converter Clutch Circuit Low) is: Faulty torque converter clutch solenoid with high internal resistance

How much does it cost to fix P2769?

Typical repair costs for P2769 range from $200 to $1,000, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2769?

Torque converter may not lock up properly, causing reduced fuel economy and increased transmission heat. Safe to drive but extended operation without lockup may lead to transmission overheating and damage.

How do I diagnose P2769?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2769 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Automatic Transmission

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.