OBDHut

OBDHut

P2773

Moderate

Four Wheel Drive (4WD) Low Switch Circuit Low

What Does P2773 Mean?

The PCM has detected abnormally low voltage in the 4WD low range switch circuit. This suggests a short to ground, open circuit, or switch failure causing insufficient signal voltage.

Common Causes

35%

Short to ground in wiring harness or damaged wire insulation

Transfer Case Wiring Harness
Wire Insulation

30%

Failed 4WD selector switch with internal short circuit

4WD Switch
Transfer Case Position Sensor

20%

Corroded or damaged connector causing poor contact or ground fault

Transfer Case Connector
Switch Connector

10%

Open circuit in switch power supply or signal wire

Wiring Harness
Switch Power Wire

5%

Failed transfer case control module with shorted input circuit

Transfer Case Control Module

Diagnostic Steps

1

Step 1: Measure voltage at 4WD switch connector with key on (should show reference voltage, typically 5V or 12V)

2

Step 2: Disconnect switch and check for short to ground in harness wiring using ohmmeter

3

Step 3: Test switch resistance across terminals in various positions per service manual specifications

4

Step 4: Inspect wiring harness for chafing, pinching, or damage especially near transfer case mounting points

5

Step 5: Check connector pins for corrosion, bent terminals, or water intrusion causing ground fault

Estimated Repair Cost

$100 - $550

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2773 mean?

The PCM has detected abnormally low voltage in the 4WD low range switch circuit. This suggests a short to ground, open circuit, or switch failure causing insufficient signal voltage.

What causes P2773?

The most common cause of P2773 (Four Wheel Drive (4WD) Low Switch Circuit Low) is: Short to ground in wiring harness or damaged wire insulation

How much does it cost to fix P2773?

Typical repair costs for P2773 range from $100 to $550, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2773?

4WD low range will not engage properly, limiting off-road capability. Vehicle remains safe for normal 2WD driving but should not be operated in conditions requiring 4WD.

How do I diagnose P2773?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2773 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Four Wheel Drive System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.