OBDHut

OBDHut

P2792

Moderate

Gate Select Direction Circuit High

What Does P2792 Mean?

The transmission control module detects an abnormally high voltage signal in the gate select direction circuit. This circuit controls the shifter mechanism's ability to select different gear ranges in electronically-controlled transmissions.

Common Causes

35%

Shorted gate select position sensor or wiring harness shorted to voltage

Gate Select Position Sensor
Transmission Wiring Harness

30%

Faulty transmission control module (TCM) internal circuit failure

Transmission Control Module

20%

Damaged or corroded connector pins at TCM or sensor creating short circuit

TCM Connector
Sensor Connector

15%

Failed shift actuator solenoid or motor with internal short

Shift Actuator
Gate Select Solenoid

Diagnostic Steps

1

Step 1: Inspect gate select position sensor connector and wiring for damage, corrosion, or signs of short to voltage

2

Step 2: Measure voltage at gate select sensor signal wire with key on, engine off (should be 0.5-4.5V typically, check specifications)

3

Step 3: Disconnect gate select sensor and measure circuit resistance; check for short to power

4

Step 4: Test gate select actuator/solenoid for proper resistance and operation

5

Step 5: If all components test normal, substitute known-good TCM to verify module failure

Estimated Repair Cost

$150 - $1,200

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2792 mean?

The transmission control module detects an abnormally high voltage signal in the gate select direction circuit. This circuit controls the shifter mechanism's ability to select different gear ranges in electronically-controlled transmissions.

What causes P2792?

The most common cause of P2792 (Gate Select Direction Circuit High) is: Shorted gate select position sensor or wiring harness shorted to voltage

How much does it cost to fix P2792?

Typical repair costs for P2792 range from $150 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2792?

Vehicle may become stuck in gear or experience unintended gear selection. May cause sudden loss of transmission function, creating hazardous driving conditions.

How do I diagnose P2792?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2792 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Transmission Control System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.