What Does P282D Mean?
The TCM has detected an open circuit in the control circuit for pressure control solenoid K. This means no electrical continuity exists between the TCM and the solenoid, preventing proper transmission pressure control.
Safety Warning
May cause transmission to enter limp mode, loss of certain gears, or harsh engagement. Vehicle may be unsafe to drive at highway speeds due to limited gear availability.
Common Causes
40%
Broken or severed wire in transmission harness to solenoid K
25%
Completely failed pressure control solenoid K with open winding
20%
Disconnected or severely corroded connector at solenoid
10%
Internal TCM connector failure or broken solder joint
5%
Damaged transmission internal harness at valve body
Diagnostic Steps
1
Step 1: Visually inspect solenoid connector for disconnection, pushed-out pins, or severe corrosion
2
Step 2: Measure resistance of solenoid K directly at solenoid connector (should be 3-7 ohms typically)
3
Step 3: Perform continuity test from TCM connector to solenoid connector on control circuit wire
4
Step 4: Check for proper ground circuit continuity from solenoid to TCM
5
Step 5: If all wiring tests good, suspect internal valve body harness damage or TCM failure
Estimated Repair Cost
$200 - $800
Parts + labor, varies by vehicle and location
The TCM has detected an open circuit in the control circuit for pressure control solenoid K. This means no electrical continuity exists between the TCM and the solenoid, preventing proper transmission pressure control.
The most common cause of P282D (Pressure Control Solenoid "K" Control Circuit/Open) is: Broken or severed wire in transmission harness to solenoid K
Typical repair costs for P282D range from $200 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.
May cause transmission to enter limp mode, loss of certain gears, or harsh engagement. Vehicle may be unsafe to drive at highway speeds due to limited gear availability.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P282D to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Transmission hydraulic pressure control
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
