OBDHut

OBDHut

P3411

Moderate

Cylinder 2 Deactivation/Intake Valve Control Circuit Low

What Does P3411 Mean?

The PCM has detected an abnormally low voltage in the cylinder 2 intake valve control or deactivation circuit. This indicates a short to ground condition in the wiring, solenoid, or control circuit.

Common Causes

40%

Wiring harness shorted to ground or engine block

Wiring Harness

30%

Internal short to ground in intake valve control solenoid

Intake Valve Control Solenoid
Deactivation Solenoid

20%

Damaged or pinched wiring at routing points

Wiring Harness
Connector

7%

Moisture intrusion in connector causing short circuit

Electrical Connector
Connector Seal

3%

Failed PCM driver circuit shorting to ground

PCM

Diagnostic Steps

1

Step 1: Disconnect cylinder 2 intake valve control solenoid and check if code clears; if so, solenoid is internally shorted

2

Step 2: Measure resistance from control circuit to ground with solenoid disconnected; should read infinite resistance

3

Step 3: Inspect wiring harness for damage, chafing, or areas where wire may contact ground

4

Step 4: Check connectors for oil contamination, corrosion, or moisture that could cause short circuits

5

Step 5: Test solenoid resistance and insulation; replace if shorted or resistance out of specification

Estimated Repair Cost

$150 - $950

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P3411 mean?

The PCM has detected an abnormally low voltage in the cylinder 2 intake valve control or deactivation circuit. This indicates a short to ground condition in the wiring, solenoid, or control circuit.

What causes P3411?

The most common cause of P3411 (Cylinder 2 Deactivation/Intake Valve Control Circuit Low) is: Wiring harness shorted to ground or engine block

How much does it cost to fix P3411?

Typical repair costs for P3411 range from $150 to $950, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P3411?

Vehicle is safe to drive but cylinder deactivation will not function, reducing fuel economy. Short circuit may potentially damage PCM if left unrepaired for extended periods.

How do I diagnose P3411?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P3411 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing/Cylinder Deactivation System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.