OBDHut

OBDHut

P3472

Moderate

Cylinder 9 Exhaust Valve Control Circuit High

What Does P3472 Mean?

The PCM has detected a high voltage condition in the control circuit for cylinder 9's exhaust valve. This typically indicates a short to voltage or an open circuit preventing proper valve control.

Common Causes

35%

Open circuit in exhaust valve control solenoid winding

Exhaust valve solenoid
VVT solenoid

30%

Wiring harness short to voltage (battery or ignition)

Wiring harness
Wire insulation

20%

Disconnected or broken electrical connector at valve solenoid

Electrical connector
Connector terminals

10%

Failed PCM unable to pull circuit low

Powertrain control module

5%

Oil contamination causing internal solenoid failure

Valve solenoid
Engine oil

Diagnostic Steps

1

Step 1: Inspect wiring and connector at cylinder 9 exhaust valve solenoid for damage, disconnection, or signs of short to power

2

Step 2: Disconnect solenoid connector and measure resistance across solenoid terminals; open circuit indicates failed solenoid

3

Step 3: With connector disconnected, check for voltage at harness side; should read 0V with key on (PCM pulls to ground)

4

Step 4: Test wiring from PCM to solenoid for short to voltage using multimeter

5

Step 5: If circuits test normal, verify PCM ground circuits are intact and test PCM operation with bi-directional scan tool commands

Estimated Repair Cost

$150 - $850

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P3472 mean?

The PCM has detected a high voltage condition in the control circuit for cylinder 9's exhaust valve. This typically indicates a short to voltage or an open circuit preventing proper valve control.

What causes P3472?

The most common cause of P3472 (Cylinder 9 Exhaust Valve Control Circuit High) is: Open circuit in exhaust valve control solenoid winding

How much does it cost to fix P3472?

Typical repair costs for P3472 range from $150 to $850, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P3472?

Safe to drive short distances but may cause misfires, reduced performance, and increased emissions. Extended driving may damage catalytic converter.

How do I diagnose P3472?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P3472 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.