OBDHut

OBDHut

U0063

Difficult

Vehicle Communication Bus D (-) shorted to Bus D (+)

What Does U0063 Mean?

The positive and negative wires of communication bus D are shorted together. This creates a zero-voltage differential, completely preventing network communication on this bus.

Common Causes

35%

Crushed or pinched wiring harness shorting CAN D+ and CAN D- together

Wiring harness
CAN bus wiring

25%

Damaged connector with crossed or touching pins

Connector housing
Connector terminals

20%

Faulty control module with internal short between CAN pins

Electronic control module
Gateway module

12%

Liquid intrusion causing conductive path between bus wires

Connector seals
Wiring harness

8%

Improper repair or aftermarket installation crossing wires

Splice connectors
Repair wiring

Diagnostic Steps

1

Step 1: Measure resistance between CAN D+ and CAN D- with ignition off; should read 60 ohms, not near zero ohms

2

Step 2: Disconnect modules one at a time while monitoring resistance to isolate short location

3

Step 3: Inspect connectors for bent pins, corrosion, or foreign material bridging terminals

4

Step 4: Check wiring harness for physical damage, especially at flex points and mounting brackets

5

Step 5: Verify proper pin assignments at each connector using wiring diagram to rule out miswiring

Estimated Repair Cost

$150 - $1,000

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U0063 mean?

The positive and negative wires of communication bus D are shorted together. This creates a zero-voltage differential, completely preventing network communication on this bus.

What causes U0063?

The most common cause of U0063 (Vehicle Communication Bus D (-) shorted to Bus D (+)) is: Crushed or pinched wiring harness shorting CAN D+ and CAN D- together

How much does it cost to fix U0063?

Typical repair costs for U0063 range from $150 to $1,000, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U0063?

Complete loss of bus D communication will disable multiple systems potentially including airbags, ABS, and stability control. Vehicle may be unsafe to operate and may not start.

How do I diagnose U0063?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0063 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Vehicle Communication Network

Difficulty

Difficult

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.