What Does U0111 Mean?
The control module cannot communicate with Battery Energy Control Module A over the vehicle's communication network. This module monitors and manages battery charging, state of charge, and energy distribution in hybrid/electric vehicles.
Safety Warning
Vehicle may not start, enter limp mode, or experience unexpected power loss. Hybrid/electric systems may not function properly, potentially leaving the vehicle immobile.
Common Causes
35%
Damaged or corroded wiring harness or connectors between modules
25%
Failed Battery Energy Control Module A
20%
CAN bus network fault or short circuit
15%
Low system voltage or poor ground connection
5%
Software or programming issue requiring module reflash
Diagnostic Steps
1
Step 1: Check battery voltage and ensure proper power supply to all modules (minimum 12V)
2
Step 2: Inspect wiring harness and connectors to Battery Energy Control Module for damage, corrosion, or loose connections
3
Step 3: Use scan tool to verify if Battery Energy Control Module A is responsive and check for active network communication
4
Step 4: Measure CAN bus resistance between CAN High and CAN Low (should read approximately 60 ohms with key off)
5
Step 5: Check for technical service bulletins and verify module software is current; perform module relearn or reprogramming if needed
Estimated Repair Cost
$200 - $1,500
Parts + labor, varies by vehicle and location
The control module cannot communicate with Battery Energy Control Module A over the vehicle's communication network. This module monitors and manages battery charging, state of charge, and energy distribution in hybrid/electric vehicles.
The most common cause of U0111 (Lost Communication With Battery Energy Control Module "A") is: Damaged or corroded wiring harness or connectors between modules
Typical repair costs for U0111 range from $200 to $1,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Vehicle may not start, enter limp mode, or experience unexpected power loss. Hybrid/electric systems may not function properly, potentially leaving the vehicle immobile.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0111 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Network
System
Hybrid/Electric Battery Management
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
