OBDHut

OBDHut

U0127

Moderate

Lost Communication With Tire Pressure Monitor Module

What Does U0127 Mean?

The control modules on the vehicle network cannot communicate with the Tire Pressure Monitoring System (TPMS) module. This indicates a communication failure on the data bus network, preventing tire pressure data from being shared with other systems.

Common Causes

35%

Faulty TPMS module or internal module failure

TPMS Control Module

30%

Damaged or corroded wiring/connectors in TPMS module circuit

Wiring Harness
Connector Terminals

20%

CAN bus circuit short or open between modules

CAN Bus Wiring
Network Termination Resistor

10%

Blown fuse or power supply issue to TPMS module

Fuse
Power Distribution Circuit

5%

Software/firmware corruption in TPMS module

TPMS Control Module

Diagnostic Steps

1

Step 1: Verify TPMS module has proper power and ground using multimeter

2

Step 2: Check CAN bus voltage levels (should be ~2.5V on both CAN-H and CAN-L with key on)

3

Step 3: Inspect TPMS module connectors for corrosion, bent pins, or moisture intrusion

4

Step 4: Use scan tool to attempt communication directly with TPMS module and check for other network codes

5

Step 5: Test CAN bus integrity between TPMS module and nearest network junction using resistance measurements

Estimated Repair Cost

$100 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U0127 mean?

The control modules on the vehicle network cannot communicate with the Tire Pressure Monitoring System (TPMS) module. This indicates a communication failure on the data bus network, preventing tire pressure data from being shared with other systems.

What causes U0127?

The most common cause of U0127 (Lost Communication With Tire Pressure Monitor Module) is: Faulty TPMS module or internal module failure

How much does it cost to fix U0127?

Typical repair costs for U0127 range from $100 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U0127?

Loss of tire pressure warnings could result in driving on under-inflated tires, potentially causing tire failure or reduced vehicle control. Continue driving with caution and manually check tire pressures.

How do I diagnose U0127?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0127 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Tire Pressure Monitoring System / CAN Network

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.