OBDHut

OBDHut

U0219

Moderate

Lost Communication With "Door Switch E"

What Does U0219 Mean?

The control module has lost communication with door switch E on the vehicle's network bus. This indicates a network communication failure between the body control module and a specific door switch module, typically affecting a rear passenger door.

Common Causes

35%

Wiring harness damage, chafing, or connector corrosion in door jamb area

Door Wiring Harness
Door Jamb Connectors

30%

Failed door switch module or control unit

Door Switch Module
Door Control Unit

20%

Poor ground connection at door module

Ground Wire
Ground Connection Point

10%

CAN bus network fault or termination resistor issue

CAN Bus Wiring
Termination Resistor

5%

Body control module software or hardware fault

Body Control Module

Diagnostic Steps

1

Step 1: Inspect door jamb wiring harness for visible damage, breaks, or chafing where door opens and closes

2

Step 2: Check all connectors at door switch module for corrosion, pushed-out pins, or water intrusion

3

Step 3: Using scan tool, attempt to communicate directly with door switch E module and check for response

4

Step 4: Measure voltage and ground at door switch module connector; verify power supply (typically 12V) and clean ground (less than 0.1V)

5

Step 5: Check CAN bus continuity and resistance between door module and body control module (should read 60-120 ohms with modules disconnected)

Estimated Repair Cost

$150 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U0219 mean?

The control module has lost communication with door switch E on the vehicle's network bus. This indicates a network communication failure between the body control module and a specific door switch module, typically affecting a rear passenger door.

What causes U0219?

The most common cause of U0219 (Lost Communication With "Door Switch E") is: Wiring harness damage, chafing, or connector corrosion in door jamb area

How much does it cost to fix U0219?

Typical repair costs for U0219 range from $150 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U0219?

No direct safety concern, but may affect door lock/unlock functions, interior lighting, and window operation. Vehicle remains safe to drive.

How do I diagnose U0219?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0219 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Body Control Network

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.