What Does U0416 Mean?
The vehicle dynamics control module (stability/traction control) is transmitting invalid or corrupted data to other vehicle systems. This prevents proper coordination of stability, traction, and braking interventions.
Safety Warning
Electronic stability control and traction control systems will be disabled, greatly increasing risk of loss of control during cornering, acceleration, or adverse weather. Immediate repair required for safe operation.
Common Causes
38%
Failed vehicle dynamics control module with internal processor or memory fault
28%
CAN bus communication network wiring damage or short circuit
18%
Defective wheel speed sensor sending erratic signals to dynamics module
10%
Low or unstable battery voltage affecting module data transmission
6%
Steering angle sensor providing corrupted data to dynamics module
Diagnostic Steps
1
Step 1: Verify battery and charging system voltage under load; ensure stable 13.5-14.5V
2
Step 2: Inspect all wheel speed sensors and wiring for damage or air gap issues
3
Step 3: Check steering angle sensor calibration and verify proper data output using scan tool
4
Step 4: Test CAN bus integrity at vehicle dynamics module connector; verify 2.5V on CAN High and Low lines
5
Step 5: Monitor module data PIDs in real-time while driving to identify which parameters are invalid; update or replace module as needed
Estimated Repair Cost
$250 - $1,800
Parts + labor, varies by vehicle and location
The vehicle dynamics control module (stability/traction control) is transmitting invalid or corrupted data to other vehicle systems. This prevents proper coordination of stability, traction, and braking interventions.
The most common cause of U0416 (Invalid Data Received From Vehicle Dynamics Control Module) is: Failed vehicle dynamics control module with internal processor or memory fault
Typical repair costs for U0416 range from $250 to $1,800, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Electronic stability control and traction control systems will be disabled, greatly increasing risk of loss of control during cornering, acceleration, or adverse weather. Immediate repair required for safe operation.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0416 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Network
System
Vehicle Stability Control / Traction Control
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
