What Does U1022 Mean?
The control module cannot receive valid primary identification data from another module on the SCP network. This prevents proper module-to-module communication and coordinated system operation.
Common Causes
35%
Faulty instrument cluster or body control module
30%
SCP network bus wiring short to ground or power
20%
Corrupted module software or calibration
15%
Failed module causing bus lockup or signal interference
Diagnostic Steps
1
Step 1: Identify which module is requesting primary ID data using scan tool module communication map
2
Step 2: Check all network modules for software updates or TSBs related to communication issues
3
Step 3: Disconnect non-essential modules one at a time to isolate module causing bus interference
4
Step 4: Use oscilloscope to monitor SCP bus for proper message traffic and timing
5
Step 5: Verify module part numbers match vehicle configuration and programming is current
Estimated Repair Cost
$150 - $1,200
Parts + labor, varies by vehicle and location
The control module cannot receive valid primary identification data from another module on the SCP network. This prevents proper module-to-module communication and coordinated system operation.
The most common cause of U1022 (SCP (J1850) Invalid or Missing Data for Primary Id) is: Faulty instrument cluster or body control module
Typical repair costs for U1022 range from $150 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Generally safe to drive, but gauges, warning lights, or engine performance may be affected depending on which module communication is lost.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U1022 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Network
System
Network Communication / Multiple Systems
Difficulty
Type
Manufacturer
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
