OBDHut

OBDHut

U1057

Professional

SCP (J1850) Invalid or Missing Data for Vehicle Configuration

What Does U1057 Mean?

Similar to U1056, this code indicates invalid or missing vehicle configuration data on the SCP network. This is typically from a different requesting module or represents a different configuration parameter set.

Common Causes

40%

Generic Electronic Module (GEM) or BCM communication failure

GEM
BCM
Module connector

25%

Network wiring short or open circuit affecting data transmission

SCP network wiring
Wiring harness

20%

Module not programmed with vehicle-specific configuration after replacement

Replacement module

10%

Corrupted configuration memory in source module

BCM
GEM
PATS module

5%

Poor ground connection at configuration module

Ground straps
Module ground circuit

Diagnostic Steps

1

Step 1: Compare codes U1056 and U1057 to determine if same or different modules are affected

2

Step 2: Inspect all SCP network connectors for water intrusion, corrosion, or bent pins

3

Step 3: Test continuity of SCP bus circuits between all major modules

4

Step 4: Use factory scan tool to access module configuration menus and verify data integrity

5

Step 5: Clear codes after ensuring good connections and retest to see if codes return

6

Step 6: Program or configure affected module using factory procedures and equipment

Estimated Repair Cost

$100 - $800

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U1057 mean?

Similar to U1056, this code indicates invalid or missing vehicle configuration data on the SCP network. This is typically from a different requesting module or represents a different configuration parameter set.

What causes U1057?

The most common cause of U1057 (SCP (J1850) Invalid or Missing Data for Vehicle Configuration) is: Generic Electronic Module (GEM) or BCM communication failure

How much does it cost to fix U1057?

Typical repair costs for U1057 range from $100 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U1057?

Vehicle systems may not function as intended, potentially affecting convenience features or secondary safety systems. Generally safe to drive to repair facility.

How do I diagnose U1057?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U1057 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Vehicle Communication Network

Difficulty

Professional

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.