OBDHut

OBDHut

U1114

Moderate

SCP (J1850) Invalid or Missing Data for Charging System

What Does U1114 Mean?

The requesting module cannot receive valid charging system data over the SCP network. This indicates the PCM is not broadcasting alternator/charging information to other modules that need it.

Common Causes

35%

Failed alternator or voltage regulator preventing proper charging data

Alternator
Voltage regulator

25%

Faulty powertrain control module unable to broadcast charging data

PCM

20%

Network communication fault preventing data transmission

SCP network wiring
Connectors

15%

Damaged alternator wiring harness or connector

Alternator harness
PCM connector

5%

Low battery voltage affecting system operation

Battery
Battery cables

Diagnostic Steps

1

Step 1: Test charging system output voltage at battery terminals with engine running (should be 13.5-14.5V)

2

Step 2: Monitor charging system PIDs on scan tool to verify PCM is receiving alternator data

3

Step 3: Check alternator field circuit and communication wire for proper voltage and continuity

4

Step 4: Inspect all connections between alternator, PCM, and battery for corrosion or damage

5

Step 5: Perform alternator load test to verify proper current output under electrical load

Estimated Repair Cost

$200 - $800

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U1114 mean?

The requesting module cannot receive valid charging system data over the SCP network. This indicates the PCM is not broadcasting alternator/charging information to other modules that need it.

What causes U1114?

The most common cause of U1114 (SCP (J1850) Invalid or Missing Data for Charging System) is: Failed alternator or voltage regulator preventing proper charging data

How much does it cost to fix U1114?

Typical repair costs for U1114 range from $200 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U1114?

May result in battery discharge and vehicle stalling if charging system fails. Battery warning light will likely be illuminated requiring immediate diagnosis.

How do I diagnose U1114?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U1114 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Charging System / Network Communication

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.