OBDHut

OBDHut

U1119

Professional

SCP (J1850) Invalid or Missing Data for Primary Id

What Does U1119 Mean?

Similar to U1118, this code indicates invalid or missing data from a different primary identifier on the SCP J1850 network. Multiple U-codes typically indicate widespread network communication issues.

Common Causes

35%

Damaged or corroded SCP bus wiring or terminating resistor failure

Network Bus Wiring
Terminating Resistor
Bus Connectors

30%

Failed control module not broadcasting required primary ID messages

Body Control Module
Instrument Cluster
GEM Module

20%

Electrical interference on network from aftermarket accessories or faulty module

Aftermarket Alarm
Remote Start
Audio Equipment

15%

Low voltage condition during cranking or operation affecting multiple modules

Battery
Starter
Alternator

Diagnostic Steps

1

Step 1: Document all current and pending U-codes to identify pattern and affected modules

2

Step 2: Check for aftermarket electrical accessories and temporarily disconnect to test network

3

Step 3: Monitor network voltage on SCP bus lines (+ and -) with oscilloscope looking for proper message traffic

4

Step 4: Perform module isolation by disconnecting modules one at a time to identify communication disruptor

5

Step 5: Test terminating resistor value (should be approximately 100-120 ohms across SCP+ and SCP-)

Estimated Repair Cost

$150 - $1,400

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U1119 mean?

Similar to U1118, this code indicates invalid or missing data from a different primary identifier on the SCP J1850 network. Multiple U-codes typically indicate widespread network communication issues.

What causes U1119?

The most common cause of U1119 (SCP (J1850) Invalid or Missing Data for Primary Id) is: Damaged or corroded SCP bus wiring or terminating resistor failure

How much does it cost to fix U1119?

Typical repair costs for U1119 range from $150 to $1,400, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U1119?

May cause erratic gauge readings, warning light issues, or intermittent system failures. Vehicle is generally safe to drive but should be repaired to prevent further issues.

How do I diagnose U1119?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U1119 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Vehicle Communication Network

Difficulty

Professional

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.