OBDHut

OBDHut

U1184

Moderate

SCP (J1850) Invalid or Missing Data for Window Wiper / Washer

What Does U1184 Mean?

The control module is not receiving valid wiper/washer data over the SCP network. This prevents proper coordination between the wiper control module and other vehicle systems that need wiper status information.

Common Causes

40%

Failed windshield wiper control module or multifunction switch not transmitting data

Wiper Control Module
Multifunction Switch
Smart Junction Box

30%

Open or shorted circuit in SCP network wiring between wiper module and other controllers

Network Wiring
Module Connectors
Splice Points

20%

Body Control Module or GEM not receiving wiper status messages properly

Body Control Module
GEM Module

10%

Corroded connections or water damage at wiper motor or control module

Wiper Motor Connector
Module Seals

Diagnostic Steps

1

Step 1: Test wiper system operation manually and verify which functions work or fail

2

Step 2: Check which module is setting the code to determine if it's a transmitter or receiver issue

3

Step 3: Inspect wiper control module and multifunction switch connectors for corrosion or damage

4

Step 4: Monitor live data for wiper status signals while operating wiper switch

5

Step 5: Test continuity and resistance on SCP bus circuits between wiper module and BCM/GEM

Estimated Repair Cost

$120 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U1184 mean?

The control module is not receiving valid wiper/washer data over the SCP network. This prevents proper coordination between the wiper control module and other vehicle systems that need wiper status information.

What causes U1184?

The most common cause of U1184 (SCP (J1850) Invalid or Missing Data for Window Wiper / Washer) is: Failed windshield wiper control module or multifunction switch not transmitting data

How much does it cost to fix U1184?

Typical repair costs for U1184 range from $120 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U1184?

Wipers may still operate manually but automatic or rain-sensing features may not work. Reduced visibility during precipitation could affect safety if wipers fail completely.

How do I diagnose U1184?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U1184 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Windshield Wiper/Washer System / Body Control Network

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.