OBDHut

OBDHut

U1213

Professional

SCP (J1850) Invalid or Missing Data for Primary Id

What Does U1213 Mean?

Additional instance of missing primary identification data on the SCP network, likely set by a different receiving module than U1212. This suggests a widespread communication issue affecting multiple systems attempting to access primary control data.

Common Causes

35%

Primary control module (PCM/BCM) power loss or reset condition

PCM
BCM
Power Supply Circuit

30%

Network bus short to ground or voltage causing data corruption

SCP Bus Circuit
Wiring Harness
Chafed Wire

20%

Failed module preventing network communication for all nodes

Faulty Control Module
Network Node

15%

Corroded or loose connections at primary module or junction points

Module Connector
Splice Connections
Junction Block

Diagnostic Steps

1

Step 1: Document all modules setting U121X codes to identify communication pattern

2

Step 2: Perform network integrity test by checking resistance and voltage on SCP bus

3

Step 3: Disconnect modules one at a time to isolate a potentially shorted node pulling bus down

4

Step 4: Inspect all major harness routing areas for damage, especially near heat sources or moving parts

5

Step 5: Check for technical service bulletins related to network communication for specific vehicle

Estimated Repair Cost

$200 - $1,000

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U1213 mean?

Additional instance of missing primary identification data on the SCP network, likely set by a different receiving module than U1212. This suggests a widespread communication issue affecting multiple systems attempting to access primary control data.

What causes U1213?

The most common cause of U1213 (SCP (J1850) Invalid or Missing Data for Primary Id) is: Primary control module (PCM/BCM) power loss or reset condition

How much does it cost to fix U1213?

Typical repair costs for U1213 range from $200 to $1,000, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U1213?

Moderate safety impact. Multiple vehicle systems may malfunction simultaneously. Warning lights may be inaccurate, making it difficult to assess vehicle condition.

How do I diagnose U1213?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U1213 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Network Communication / Multiple Body/Chassis Systems

Difficulty

Professional

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.