What Does U1254 Mean?
The module is not receiving valid network control messages that manage communication protocol and bus arbitration on the SCP network. This affects the coordination and timing of all network communications.
Common Causes
35%
Body Control Module failure (network master/coordinator)
25%
SCP network bus termination resistor failure or missing
20%
Wiring harness damage affecting both SCP bus circuits
12%
Gateway module or network hub failure
8%
Software corruption in network control module
Diagnostic Steps
1
Step 1: Verify BCM is powered and communicating using factory scan tool
2
Step 2: Check for proper bus termination resistance (approximately 60-120 ohms between both bus wires)
3
Step 3: Monitor bus for proper network initialization sequence with oscilloscope
4
Step 4: Check BCM software version and reprogram if outdated or corrupted
5
Step 5: Test SCP bus signal integrity at multiple network nodes for proper voltage levels
Estimated Repair Cost
$175 - $1,000
Parts + labor, varies by vehicle and location
The module is not receiving valid network control messages that manage communication protocol and bus arbitration on the SCP network. This affects the coordination and timing of all network communications.
The most common cause of U1254 (SCP (J1850) Invalid or Missing Data for Network Control) is: Body Control Module failure (network master/coordinator)
Typical repair costs for U1254 range from $175 to $1,000, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Loss of network control can cause widespread system failures. Vehicle may experience no-start conditions or multiple system malfunctions affecting safe operation.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U1254 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Network
System
Network Communication
Difficulty
Type
Manufacturer
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
