What Does U1262 Mean?
The Standard Corporate Protocol (SCP) communication bus using the J1850 protocol has a fault preventing proper module communication. This network allows various control modules to exchange data and coordinate vehicle functions.
Common Causes
35%
Damaged or corroded wiring in the SCP bus harness, including shorts to ground or power
30%
Faulty or corrupted control module on the network causing bus disruption
20%
Poor or corroded module connector terminals creating intermittent communication
15%
Incorrect termination resistance or open circuit in the SCP bus network
Diagnostic Steps
1
Step 1: Verify the fault is present by checking for active communication with all modules on the SCP network using scan tool
2
Step 2: Measure resistance between SCP bus terminals (should be approximately 60-120 ohms depending on manufacturer specifications)
3
Step 3: Inspect all connectors on the SCP bus for corrosion, damage, or loose connections, paying special attention to splice points
4
Step 4: Disconnect modules one at a time to isolate a faulty module that may be pulling down the bus
5
Step 5: Use an oscilloscope to observe SCP bus signal quality and identify shorts or signal integrity issues
Estimated Repair Cost
$150 - $800
Parts + labor, varies by vehicle and location
The Standard Corporate Protocol (SCP) communication bus using the J1850 protocol has a fault preventing proper module communication. This network allows various control modules to exchange data and coordinate vehicle functions.
The most common cause of U1262 (SCP (J1850) Communication Bus Fault) is: Damaged or corroded wiring in the SCP bus harness, including shorts to ground or power
Typical repair costs for U1262 range from $150 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Vehicle may experience loss of certain functions like ABS, traction control, or instrument cluster operation. Driveability may be affected if engine control communication is lost.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U1262 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Network
System
Network Communications
Difficulty
Type
Manufacturer
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
