OBDHut

OBDHut

P1295

Critical
Moderate

Multi-faults - Bank 1 - With Low Side Shorts

What Does P1295 Mean?

The PCM has detected multiple low-side short circuits in the Bank 1 fuel injector control circuits. This means one or more injector ground circuits are shorted to ground or to each other, causing improper injector operation.

Safety Warning

Engine will run poorly or not at all, potentially stalling without warning. Vehicle should not be driven until repaired.

Common Causes

40%

Chafed wiring causing short to ground

Injector wiring harness
Wire loom

25%

Failed fuel injector with internal short to ground

Fuel injector

20%

Damaged injector connector with crossed pins

Injector connector

10%

Water intrusion causing short in connector

Injector connector
Valve cover gasket

5%

Failed PCM low-side driver circuit

PCM

Diagnostic Steps

1

Step 1: Disconnect all Bank 1 injectors and inspect connectors for damage, corrosion, or oil contamination

2

Step 2: Measure resistance from each injector low-side control wire to ground with injectors disconnected (should be open circuit/infinite resistance)

3

Step 3: Inspect wiring harness routing for chafing against engine components or heat shields

4

Step 4: Test each Bank 1 injector coil resistance and check for shorts to ground

5

Step 5: If wiring and injectors test good, suspect PCM internal driver short

Estimated Repair Cost

$150 - $1,500

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P1295 mean?

The PCM has detected multiple low-side short circuits in the Bank 1 fuel injector control circuits. This means one or more injector ground circuits are shorted to ground or to each other, causing improper injector operation.

What causes P1295?

The most common cause of P1295 (Multi-faults - Bank 1 - With Low Side Shorts) is: Chafed wiring causing short to ground

How much does it cost to fix P1295?

Typical repair costs for P1295 range from $150 to $1,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P1295?

Engine will run poorly or not at all, potentially stalling without warning. Vehicle should not be driven until repaired.

How do I diagnose P1295?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P1295 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Fuel Injection System

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.