OBDHut

OBDHut

P1302

Critical
Moderate

Injector High Sides Shorted Together

What Does P1302 Mean?

The PCM has detected that multiple fuel injector high-side power circuits are shorted together. This means the power supply wires for different injectors are touching, causing multiple injectors to fire simultaneously or incorrectly.

Safety Warning

Engine will run extremely poorly with multiple cylinders misfiring or flooding. Risk of engine damage from overfueling. Do not drive until repaired.

Common Causes

45%

Damaged wiring harness with exposed wires touching

Injector wiring harness
Wire loom

25%

Melted connector pins shorted together from overheating

Injector connector
Connector housing

15%

Incorrectly repaired wiring with crossed connections

Splice connectors
Electrical tape

10%

Damaged PCM internal circuits with cross-connected drivers

PCM

5%

Liquid contamination in injector connector causing bridging

Injector connectors
Connector seals

Diagnostic Steps

1

Step 1: Disconnect all fuel injector connectors and inspect for melted, damaged, or bent pins

2

Step 2: Measure resistance between high-side circuits of different injectors with all injectors disconnected (should be infinite/open)

3

Step 3: Carefully inspect entire injector harness for chafed areas where wires may be exposed and touching

4

Step 4: Check for liquid contamination in valve cover area that may have entered connectors

5

Step 5: Test PCM injector driver circuits individually to verify no internal shorts

Estimated Repair Cost

$200 - $1,600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P1302 mean?

The PCM has detected that multiple fuel injector high-side power circuits are shorted together. This means the power supply wires for different injectors are touching, causing multiple injectors to fire simultaneously or incorrectly.

What causes P1302?

The most common cause of P1302 (Injector High Sides Shorted Together) is: Damaged wiring harness with exposed wires touching

How much does it cost to fix P1302?

Typical repair costs for P1302 range from $200 to $1,600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P1302?

Engine will run extremely poorly with multiple cylinders misfiring or flooding. Risk of engine damage from overfueling. Do not drive until repaired.

How do I diagnose P1302?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P1302 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Fuel Injection System

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.