OBDHut

OBDHut

P2050

Moderate

Reductant Injection Valve Circuit/Open Bank 2 Unit 1

What Does P2050 Mean?

The ECM has detected an open circuit or electrical fault in the reductant injector valve circuit for Bank 2 Unit 1. This prevents proper DEF injection and NOx reduction in the exhaust aftertreatment system.

Common Causes

40%

Faulty reductant injector with open coil winding or internal failure

Reductant Injector

25%

Broken or disconnected wiring to reductant injector

Wiring Harness
Connector

20%

Corroded or damaged injector connector preventing electrical contact

Injector Connector
Connector Terminals

10%

ECM driver circuit failure for injector control

ECM

5%

Blown fuse or open relay in reductant injector power supply

Fuse
Relay

Diagnostic Steps

1

Step 1: Inspect reductant injector connector for damage, corrosion, or loose connections

2

Step 2: Measure injector coil resistance with multimeter (typical range 3-8 ohms, verify with service data)

3

Step 3: Check continuity of wiring between ECM and injector connector on both power and ground circuits

4

Step 4: Verify power supply to injector using test light or multimeter during commanded injection

5

Step 5: If wiring and power are good, replace reductant injector and retest system

Estimated Repair Cost

$300 - $1,200

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2050 mean?

The ECM has detected an open circuit or electrical fault in the reductant injector valve circuit for Bank 2 Unit 1. This prevents proper DEF injection and NOx reduction in the exhaust aftertreatment system.

What causes P2050?

The most common cause of P2050 (Reductant Injection Valve Circuit/Open Bank 2 Unit 1) is: Faulty reductant injector with open coil winding or internal failure

How much does it cost to fix P2050?

Typical repair costs for P2050 range from $300 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2050?

Vehicle may enter power derate mode and display emissions system warnings. May result in vehicle no-start or shutdown after grace period expires.

How do I diagnose P2050?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2050 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Selective Catalytic Reduction (SCR) Emissions System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.