OBDHut

OBDHut

P2052

Moderate

Reductant Injection Valve Circuit High Bank 2 Unit 1

What Does P2052 Mean?

The ECM detects abnormally high voltage or resistance in the reductant injector circuit for Bank 2 Unit 1. This indicates an open circuit, short to voltage, or high resistance preventing proper injector control.

Common Causes

40%

Faulty reductant injector with open coil or high resistance

Reductant Injector

25%

Open circuit or broken wire in injector control circuit

Wiring Harness

20%

Poor connection at injector connector with high resistance

Injector Connector
Connector Terminals

10%

Short to battery voltage in injector control wire

Wiring Harness

5%

ECM injector driver circuit failure

ECM

Diagnostic Steps

1

Step 1: Check injector connector for loose connections, pushed-out pins, or high resistance contacts

2

Step 2: Measure injector coil resistance with injector disconnected (should be within 3-8 ohms typically)

3

Step 3: Test for voltage at injector connector with key on - should not see battery voltage on control circuit

4

Step 4: Check continuity between ECM and injector connector on control circuit wiring

5

Step 5: Replace reductant injector if resistance is out of specification or infinite

Estimated Repair Cost

$300 - $1,300

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2052 mean?

The ECM detects abnormally high voltage or resistance in the reductant injector circuit for Bank 2 Unit 1. This indicates an open circuit, short to voltage, or high resistance preventing proper injector control.

What causes P2052?

The most common cause of P2052 (Reductant Injection Valve Circuit High Bank 2 Unit 1) is: Faulty reductant injector with open coil or high resistance

How much does it cost to fix P2052?

Typical repair costs for P2052 range from $300 to $1,300, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2052?

Vehicle will display warning messages and may enter derate mode limiting speed and power. Extended operation may result in vehicle shutdown to comply with emissions regulations.

How do I diagnose P2052?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2052 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Selective Catalytic Reduction (SCR) Emissions System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.