OBDHut

OBDHut

P2116

Moderate

Throttle/Pedal Position Sensor "E" Minimum Stop Performance

What Does P2116 Mean?

The PCM has detected that throttle or pedal position sensor E is not achieving the expected minimum stop performance specification. This represents a fault in one of the redundant position sensor circuits.

Common Causes

35%

Throttle body position sensor E circuit failure or sensor degradation

Throttle Body Assembly
TPS Sensor

30%

Accelerator pedal position sensor E malfunction or internal short

Accelerator Pedal Position Sensor
Pedal Assembly

20%

Corroded connectors, damaged wiring, or poor pin contact in sensor E circuit

Wiring Harness
Connectors

10%

PCM power supply fault or internal processing error affecting sensor E

PCM
Power Supply Circuit

5%

Carbon buildup or mechanical issue affecting sensor calibration point

Throttle Body
Sensor Assembly

Diagnostic Steps

1

Step 1: Verify sensor E minimum voltage reading with scan tool at rest position; compare to specifications

2

Step 2: Backprobe sensor E connector and measure reference voltage, signal voltage, and ground quality with DVOM

3

Step 3: Inspect connector terminals for corrosion, bent pins, or moisture intrusion

4

Step 4: Perform rationality check by comparing sensor E readings against other position sensors through pedal sweep

5

Step 5: Replace throttle body or pedal position sensor if sensor E fails to meet minimum stop specifications with good wiring

Estimated Repair Cost

$100 - $700

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2116 mean?

The PCM has detected that throttle or pedal position sensor E is not achieving the expected minimum stop performance specification. This represents a fault in one of the redundant position sensor circuits.

What causes P2116?

The most common cause of P2116 (Throttle/Pedal Position Sensor "E" Minimum Stop Performance) is: Throttle body position sensor E circuit failure or sensor degradation

How much does it cost to fix P2116?

Typical repair costs for P2116 range from $100 to $700, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2116?

Vehicle may experience reduced power mode activation. Loss of redundant sensor data may result in inconsistent throttle response and difficulty maintaining steady speed.

How do I diagnose P2116?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2116 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Electronic Throttle Control System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.