OBDHut

OBDHut

P3475

Moderate

Cylinder 10 Deactivation/Intake Valve Control Circuit Low

What Does P3475 Mean?

The PCM has detected a low voltage condition in cylinder 10's intake valve deactivation control circuit. This electrical fault prevents proper solenoid operation for cylinder deactivation.

Common Causes

35%

Wiring harness short to ground in deactivation solenoid circuit

Wiring harness
Wire insulation

30%

Failed cylinder 10 intake valve deactivation solenoid with internal short

Deactivation solenoid
Lifter control valve

20%

Corroded or oil-contaminated connector causing reduced resistance

Electrical connector
Connector seals

10%

PCM output driver failure pulling circuit low

Powertrain control module

5%

Damaged solenoid causing intermittent short to engine ground

Solenoid housing
Solenoid mounting

Diagnostic Steps

1

Step 1: Visually inspect wiring and connector at cylinder 10 intake valve deactivation solenoid for damage or oil intrusion

2

Step 2: Disconnect solenoid connector and measure solenoid resistance; verify within specifications

3

Step 3: Check for voltage at solenoid connector with key on; should show battery voltage when activated

4

Step 4: Test circuit from PCM to solenoid for short to ground using ohmmeter with connector disconnected

5

Step 5: Verify PCM operation by commanding solenoid on/off with scan tool and monitoring voltage response

Estimated Repair Cost

$150 - $850

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P3475 mean?

The PCM has detected a low voltage condition in cylinder 10's intake valve deactivation control circuit. This electrical fault prevents proper solenoid operation for cylinder deactivation.

What causes P3475?

The most common cause of P3475 (Cylinder 10 Deactivation/Intake Valve Control Circuit Low) is: Wiring harness short to ground in deactivation solenoid circuit

How much does it cost to fix P3475?

Typical repair costs for P3475 range from $150 to $850, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P3475?

Vehicle is safe to drive with no immediate safety concerns. Fuel economy will be reduced as cylinder deactivation is disabled.

How do I diagnose P3475?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P3475 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Cylinder Deactivation System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.